User Manual

4. When you have made the necessary settings, click the “Compile” button to check whether there are any
problems with the placement and connections of the component.
13.5. Tool buttons
Commands frequently used in ProVisionaie Design are provided as buttons.
Button Command Summary
[Layer]
Switch between the Audio layer and Control layer.
Alternatively, you can do so by using the shortcut keys (Ctrl+page up).
[Control
Function]
Turn this button on to emulate the configuration in the Control layer.
While the button is turned on, you cannot modify the configuration.
[Compile] Analyzes whether there is any problem with the component placement
and wiring.
[Device
Mute]
Mutes the DME7.
[Tools]
[Remote Control Setup List]
Enables you to register parameters you wish to control from the remote
controller.
[SD Card File Manager]
Enables you to register files you wish to play on the SD Card component.
[GPI]
Using the GPI ins/outs enables you to remotely control the DME7 from a
custom-made controller or external device.
[MIDI]
You can remotely control the DME7 via MIDI.
[Peak Hold]
Select “On” to hold the peak value on the meter for the component
placed in the sheet.
Select “Reset” to reset the peak hold.
[Layer Link]
Turn this command on to synchronize (link) the position of the audio
component placement between the Audio layer and Control layer.
13. Audio Processors : DME7
118 | ProVisionaire Design User Guide