User Manual

13.15.5. "MIDI" dialog box
To open this dialog box, click [MIDI] from the [Tools] button in the “Device” sheet.
You can control the DME7 via MIDI. You can also control the setting from the DME7.
In addition, you can edit the settings while the device is online.
■ Assigning items to the list
You can assign items to the list using one of the following methods.
Registration source Registration method
"Parameter Sets" area Drag and drop a snapshot to the green area of the "Program
Change" screen.
Component Editor While pressing and holding down <Ctrl>, drag and drop the
parameter to the green area of the “Control Change” screen.
"Parameter Sets" area Drag and drop the parameter to the green area of the "Control
Change" screen.
■ Common MIDI settings
• Channel
◦ Tx
Select from the MIDI transmit channels (1-16).
◦ Rx
Select from the MIDI receive channels (1-16).
◦ Program Change
Enables you to turn the Program Change Tx (transmit channel) and Rx (receive channel) on or off.
If OMNI is [ON], all Program Change messages will be received regardless of the receive channel
setting. (This applies only to the receive channels. A single channel will be used for transmission.)
13. Audio Processors : DME7
166 | ProVisionaire Design User Guide