User Manual

14.9.10. "DCA Groups"/"Mute Groups" component editor
This is a component editor to control the level and mute for multiple channels at the same time.
These component editors can register 8 groups for the DCA group and mute group for the input channels and 8
groups for the DCA group and mute group for the ZONE output.
In the DCA groups, the input level or output level of multiple channels can be controlled simultaneously with a
single knob.
The mute group can be used to turn multiple channels ON or OFF simultaneously.
•
"Input DCA Groups" component
Displays the editor to set the DCA group for the input channel.
•
"Input Mute Groups" component
Displays the editor to set the mute group for the input channel.
•
"Zone DCA Groups" component
Displays the editor to set the DCA group for the ZONE output.
•
"Zone Mute Groups" component
Displays the editor to set the mute group for the ZONE output.
■ "Input DCA Groups" component/"Zone DCA Groups" component
A screen for the "Input DCA Groups" component is shown below, but the "Zone DCA Groups" component screen
has the same layout.
① [Clear] button
This button clears all channels assigned to the corresponding group.
14. Audio Processors : MTX5-D/MTX3
236 | ProVisionaire Design User Guide