User Manual

16.8. Component editors
When you double-click a component in the device sheet, the component editor opens.
This section describes the PC series component editor, and the dialogs and windows that are closely associated
with the components. For details about other components, refer to the "ProVisionaire Design DME7 Component
Guide".
Numbe
r
Component name Details Link
①
Power This function switches the
device’s power supply and
displays the electrical current
value for the main unit.
"Power" component editor
②
DANTE IN Displays the settings related to
the [Dante] terminal input and the
level of the audio signal being
input.
"Input Alignment" component editor
③
ANALOG IN Displays the settings related to
the [INPUT] terminal input and
the level of the audio signal being
input.
"Input Alignment" component editor
④
Redundancy Sets the input source and
Override/Backup operation at a
per-channel level.
---
⑤
Input Adjusts the level of the input
channel.
---
⑥
Matrix Mixer Adjusts the group balance for
each output bus.
"ProVisionaire Design DME7 Component
Guide"
⑦
Matrix Out Adjusts the level from the matrix
mixer to the router and Dante
outputs.
---
⑧
Router Assigns matrix mixer output to
output channels.
"ProVisionaire Design DME7 Component
Guide"
16. Power Amplifiers : PC-series
ProVisionaire Design User Guide | 261