User Manual

10.17.2. Non-RM Series
This section applies to the settings for units that are not part of the RM series.
•
Device List
Displays the current device settings.
•
[Synchronize with a system clock in this computer] option button
If you select this option, the date and time of the computer’s system clock will be sent out each time the
system comes online, and the internal clock on the device will be automatically updated.
◦ [Time]
Shows the date and time of the computer system clock, ignoring the daylight saving time setting.
If this indication matches the date and time of the internal clock on the device, the time information
on the device will synchronize with that of the computer.
◦ [Daylight Saving Time(DST)]
Shows the daylight saving time used on the computer. If daylight saving time has not been
programmed, this field will display the message “Daylight Saving Time has not been executed.”
•
[Synchronize with an Internet time server] option button
If you select this and click the [Update Now] button, the internal clock of the device is updated using the
time information from the specified time server.
If any required field is not completed, time information may not be obtained. Be sure to enter an
appropriate value in all non-grayed fields.
10. Dialog boxes
90 | ProVisionaire Design User Guide