User Manual

10.25. "Linked Presets Manager" dialog box
To open this window, click on the toolbar.
You can store or recall presets and snapshots for each device collectively.
A group of any presets for each device is called a “linked preset.”
This dialog box enables you to assign presets on the devices to a linked preset.
Basic use is as follows.
1. In the list at left, select the store-destination link preset.
2. In the list at right, add a check mark to the devices that you want to store.
3.
Click the [Store] button.
The preset is stored in the number you selected in step 1 for each device that you selected in step 2.
To remove a device from being a target of linked presets, select [----] in the [Preset] column of the list at
right.
For the DME7, first store a linked preset, and then select a stored snapshot in the “Preset” column.
If you specified presets on each device in advance, use the following procedure.
1. In the list at left, select the store-destination link preset.
2. In the list at right, clear the check box of the device on which a preset has been specified.
3. In the list at right, select the [Preset] of the device on which it was already stored.
4. Click the [Store] button.
•
[Store] button
Store the linked preset. When you store to an empty linked preset, the "Store Linked Preset" dialog box
appears.
•
[Recall] button
Recalls the selected linked preset.
•
Link preset field
Selects the linked preset to store or recall.
•
[Copy] button
Copies the selected linked preset.
•
[Paste] button
Pastes the copied linked preset to the selected linked preset.
10. Dialog boxes
106 | ProVisionaire Design V1.2 User Guide