User Manual

•
[Clear] button
Erases the selected linked preset.
•
[All On] button
Adds a check mark to the [Store] check box of all devices in the list.
•
[All Off] button
Clears the check mark from the [Store] check box of all devices in the list.
•
[Preset] button
Shows the device sheet of the currently-selected device.
•
Device list
Shows a list of the devices with preset functionality that are registered in the project.
◦ [Store] check box
If this check box is selected, the preset selected in the [Preset] list box is overwrite-saved to
devices whose [Store] check box is selected in the device list.
If the [Preset] list box is [----], it is overwrite-saved to the preset of the same number as the linked
preset.
If settings are already stored in the preset number of the device, and that preset number is selected
in the [Preset] list box, clear the check mark.
◦ Device Name / Unit ID / Model
These columns indicate the device name, device Unit ID, and device model name.
To change the device name, use the [Device Name] field in the “Properties” area of the “Project”
sheet.
◦ [Preset] list box
Select the device’s preset that you want to link to the linked preset.
You can change the preset number after storing. If you want to exclude it from linked preset recall,
select [----].
•
[Close] button
Closes the dialog box.
10. Dialog boxes
ProVisionaire Design V1.2 User Guide | 107