User Manual

Menu Content
[Duplicate Port Label - to the left] Duplicates the input port name of the selected component to the input
ports of the upstream components along the signal path.
[Create User Defined Block] Encapsulates the selected components as a User Defined Block.
13.14.3. Component Ports
Menu Content
[Duplicate Port Label - to the right] Duplicates the port name of the input port corresponding to the selected
input or output port to the input ports of the downstream components
along the signal path.
[Duplicate Port Label - to the left] Duplicates the port name of the input port corresponding to the selected
input or output port to the input ports of the upstream components along
the signal path.
13.14.4. Component editor / Parameter setting window
When you right-click a component editor or a parameter setting window, the following context menu appears.
Menu Content
[Register as default values] Register the component’s current parameter values in a style as the
default values. New components will be placed with the registered default
values.
The registered default values can be imported/exported as a style file.
[Reset default values to Factory
Default]
Returns the default value of the component to the values immediately
after ProVisionaire Design was installed.
[Copy] Copies the component, including the parameter settings of the
component editor.
[Paste Parameters] Content If you select an existing component of the same type and
execute this, the copied parameters of the component are applied.
[Add to Parameter Set] If you execute this on a parameter, the parameter is registered in the
parameter set.
If you execute this elsewhere than on a parameter, the component is
registered in the parameter set.
[Add to Remote Control List] If you execute this on a parameter, the parameter is registered in the
Remote Control Setup List.
If you execute this elsewhere than on a parameter, all of the component’s
parameters or the component’s meters are registered in the Remote
Control Setup List.
13.14.5. Wire
Right-click an item to open the subsequent context menu.
Menu Content
[Delete] Deletes the wire.
13. Audio Processors: DME7
152 | ProVisionaire Design V1.2 User Guide