User Manual

13.15. Dialog box
13.15.1. ”Compile” dialog box
To open this dialog box, click the [Compile] tool button in the “Device” sheet.
Analyzes the placement and wiring of the components in the DME7 system to determine whether there are any
problems. Here you can also view statistics such as the resource usage.
•
/Message
Indicates whether compilation was successful or failed. If it was successful, the message “Compile
Successful.” will appear. If it failed, the message “Failed to Compile.” will appear.
•
button
Click here to view the troubleshooting method.
•
[Device Information]
This area displays information about the device.
• Device list
◦ Unit ID / Model / Device Name
These rows indicate the device Unit ID, device model name, and device name.
To change the device name, use the [Device Name] field in the “Properties” area of the "Project"
sheet.
• [Capacity Information]
◦ Virtual Device
This field indicates the signal processing capacity that is specified in the Capacity field of the
device’s “Properties” area.
◦ Actual Device
This field indicates the actual signal processing capacity of a device that has been detected by
ProVisionaire Design.
13. Audio Processors: DME7
ProVisionaire Design V1.2 User Guide | 155