User Manual

ManualsBrandsYamaha ManualsInterfacesInput / output rack

181

182

183

184

185

186

187

188

189

190

Table Of Contents

ProVisionaire Design
Contents
1. Introduction
- 1.1. Information
- 1.2. Terms and concepts to understand
- 1.3. Operating requirements and installation
  - 1.3.1. Operating requirements
  - 1.3.2. Installation
- 1.4. An overview of ProVisionaire Design
2. Screen structure
- 2.1. Common to all sheets
- 2.2. "Project" sheet
- 2.3. Linked Presets
- 2.4. "Tuning" sheet for PC series/XMV series only
- 2.5. Device sheet
3. The basics of using ProVisionaire Design
- 3.1. Connecting the devices
- 3.2. Procedure
  - 3.2.1. If you can connect the device(s) to the computer
  - 3.2.2. If you cannot connect the device(s) to the computer
4. Menu bars and toolbar
- 4.1. [File] menu
- 4.2. [Edit] menu
- 4.3. [View] menu
- 4.4. [System] menu
- 4.5. [Tools] menu
- 4.6. [Arrange] menu
- 4.7. [Window] menu
- 4.8. [Help] menu
- 4.9. Buttons only on the toolbar
5. Shortcut keys
6. List of alerts
- 6.1. Power amplifiers
- 6.2. Processor
7. "Project" sheet
- 7.1. "Project" sheet
- 7.2. "Devices" area
- 7.3. "Network" area
  - 7.3.1. "Change Unit ID" dialog box
- 7.4. "Properties" area
- 7.5. Placing devices
- 7.6. Selecting multiple objects
- 7.7. Connecting ports
- 7.8. Duplicating devices
- 7.9. "Group" Editor
8. "Tuning" sheet
- 8.1. "Tuning" sheet
- 8.2. "Properties" area
- 8.3. "Project Devices" area
  - 8.3.1. [Amplifiers]
  - 8.3.2. [Speakers]
- 8.4. "Link Groups" area
9. Online and synchronization
- 9.1. Online
- 9.2. Offline
  - 9.2.1. "Offline" dialog box
10. Dialog boxes
- 10.1. Startup dialog box
- 10.2. "Go Online- From Devices" dialog box
- 10.3. "Protect File" dialog box
- 10.4. "Project Information" dialog box
- 10.5. "Print" dialog box
- 10.6. "File Storage" dialog box
  - 10.6.1. [File Manager] dialog box
- 10.7. "Network Setup" dialog box
- 10.8. "IP Settings" dialog box
- 10.9. "IP Address" dialog box
- 10.10. "Auto-Assign IP Addresses" dialog box
- 10.11. "Match Devices by IP Address" dialog box
- 10.12. "Device Information" dialog box
  - 10.12.1. “Detail>>” area
- 10.13. "Update Firmware" dialog box
- 10.14. "Initialize" dialog box
- 10.15. "Word Clock" dialog box
- 10.16. "Protect Devices" dialog box
- 10.17. "Clock" dialog box
  - 10.17.1. RM Series
  - 10.17.2. Non-RM Series
- 10.18. "Daylight Saving Time" dialog box
- 10.19. "GPI Calibration" dialog box
- 10.20. "Get Log from Devices" dialog box
- 10.21. "RM Series Settings" > "Sign up" dialog box
- 10.22. "RM Series Settings" > "Login" dialog box
- 10.23. "RM Series Settings" > "Password Settings" dialog box
- 10.24. "RM Series Settings" > "Enable SCP remote control access" dialog box
- 10.25. "Linked Presets Manager" dialog box
- 10.26. "Store Linked Preset" dialog box
- 10.27. Port Label Dialog
11. Context menus
- 11.1. Sheet tabs
- 11.2. "Project" sheet
- 11.3. Device sheet
  - 11.3.1. Components and component editors in the device sheet
12. Common operations for device sheets
- 12.1. Component editor operations
- 12.2. Editing the parameters
- 12.3. Registering parameters to ProVisionaire Control
13. Audio Processors: DME7
- 13.1. Overview
- 13.2. "Project" sheet
  - 13.2.1. Tool bar
  - 13.2.2. "Properties" area
- 13.3. Device sheet screen configuration
- 13.4. Basic use of ProVisonaire Designer
- 13.5. Tool buttons
- 13.6. "Components" area
- 13.7. Design sheet
- 13.8. Design sheet: Audio layer
  - 13.8.1. Audio Component
- 13.9. Design sheet: Control layer
- 13.10. Components other than audio or control components
- 13.11. “Parameter Sets” area
- 13.12. “Properties” area
- 13.13. "Parameters" area
- 13.14. Context Menu
- 13.15. Dialog box
- 13.16. Message List
14. Audio Processor MRX7-D
- 14.1. Overview
- 14.2. Project Sheet
- 14.3. Device Sheet Screen Configuration
- 14.4. Basic Use
- 14.5. Tool Buttons
- 14.6. Components Area
- 14.7. Design Sheet
- 14.8. Non-Audio Components
- 14.9. Parameter Sets Area
  - 14.9.1. Snapshot Group
  - 14.9.2. Steps to create a snapshot group
- 14.10. Presets Area
  - 14.10.1. Procedure
- 14.11. Parameter Link Group Area
  - 14.11.1. Link Control Editor
- 14.12. Gang Edit Group Area
  - 14.12.1. Procedure
- 14.13. Properties Area
- 14.14. Parameters Area
- 14.15. Context Menu
- 14.16. Dialog
- 14.17. Component Editor
- 14.18. Alert List
- 14.19. Flow of Paging Configuration
15. Audio Processors: MTX5-D/MTX3
- 15.1. Overview
- 15.2. "Project" sheet
  - 15.2.1. "Devices" area
  - 15.2.2. "Properties" area
- 15.3. Device sheet screen configuration
- 15.4. Tool buttons
- 15.5. "Presets" area
  - 15.5.1. Recall
- 15.6. Context menus
  - 15.6.1. MTX5-D sheet/MTX3 sheet
  - 15.6.2. Components/in the MTX/component editor
- 15.7. Dialog box
- 15.8. Alert list
- 15.9. Component editors
- 15.10. Workflow for paging settings
16. MTX I/O Expanders: EXi8 / Exo8
- 16.1. Overview
- 16.2. "Project" sheet
- 16.3. Editor
17. Power Amplifiers: PC-series
- 17.1. Overview
- 17.2. "Project" sheet
- 17.3. "Tuning" sheet
- 17.4. Device sheet screen configuration
- 17.5. "Presets" area
  - 17.5.1. "Store Preset" dialog box
- 17.6. Context Menu
- 17.7. Alert list
- 17.8. Component editors
18. Power Amplifiers: XMV-series
- 18.1. Overview
- 18.2. "Project" sheet
  - 18.2.1. "Properties" area
- 18.3. Tuning Sheet
- 18.4. Device sheet screen configuration
- 18.5. Context Menu
- 18.6. Alert list
- 18.7. Component editors
19. I/O Interface: Rio3224-D2 / Rio1608-D2
- 19.1. Overview
- 19.2. "Project" sheet
- 19.3. Editor
- 19.4. Context menu
20. I/O Interface: Tio1608-D / Tio1608-D2
- 20.1. Overview
- 20.2. "Project" sheet
- 20.3. Editor
21. I/O Interface: RSio64-D
- 21.1. Overview
- 21.2. "Project" sheet
- 21.3. Editor
22. Powered Speakers: VXL1-16P
- 22.1. Overview
- 22.2. "Project" sheet
- 22.3. Device sheet screen configuration
- 22.4. Component editors
23. Microphones: PGM1
- 23.1. Overview
- 23.2. "Project" sheet
- 23.3. "Properties" area
24. Microphones: RM-CG
- 24.1. Overview
- 24.2. "Project" sheet
- 24.3. [System] menu
- 24.4. "Network" area
- 24.5. "Properties" area
- 24.6. Device sheet screen configuration
- 24.7. Tool buttons
- 24.8. Component editors
25. Microphones: RM-TT
- 25.1. Overview
- 25.2. "Project" sheet
- 25.3. [System] menu
- 25.4. "Network" area
- 25.5. "Properties" area
- 25.6. Device sheet screen configuration
- 25.7. Tool buttons
- 25.8. Component editors
  - 25.8.1. "Microphone Settings" component editor
26. External Device: Speakers
- 26.1. Overview
- 26.2. "Project" sheet
- 26.3. "Properties" area
- 26.4. "Recall Speaker Preset(s)" dialog box
27. DCP
- 27.1. Overview
- 27.2. How to select the DCP to be connected
- 27.3. Setting method for DME7
- 27.4. Setting method for MTX5-D/MTX3
- 27.5. MRX7-D Setting Method
28. Wall-mount Controller: MCP1
- 28.1. Overview
- 28.2. Project Sheet
  - 28.2.1. Properties Area
- 28.3. Setting Method
- 28.4. Component Editor
- 28.5. Alert List
29. YDIF
- 29.1. YDIF
- 29.2. YDIF setting method (Project sheet)
- 29.3. YDIF setting method (device sheets)
30. Settings for controlling devices across subnets

14.2.2. Devices Area

If "YDIF" is added to the project, an example of connecting multiple devices by YDIF terminals is displayed.

The word clock setting is also performed automatically.

14. Audio Processor MRX7-D

ProVisionaire Design V1.2 User Guide | 185