User Manual

14.16.3. File Transfer Application
Click the Transfer button in the Remote Control Setup List dialog to open this dialog.
This transfers the exported .rcsl file, PDF file, image file, etc. to an iPad on the same network that has
ProVisionaire Touch (V1.2 or later) installed.
Before transferring, start ProVisionaire Touch and confirm that it is displayed on the screen.
If no network adapter has been selected, the [Network Setup] dialog will be displayed for you to select a network
adapter.
The file extensions that ProVisionaire Touch can receive are as follows.
.rcsl, .pdf, .jpg, .jpeg, .bmp, .png, .pvt, .ypvt, .ypvk
.pvt, .ypvt, and .ypvk files are saved in the Provisionaire Touch file folder.
.rcsl files can be used by registering the MRX7-D as a device with Provisionaire Touch.
•
System Menu
Launch the Network Setup dialog from the Network Setup command.
•
Select a file to transfer
Selects the file to be sent. Clicking the button on the right side displays the Open File dialog, which
allows you to select a file.
•
Destinations
Select the transfer destination iPad. If you don’t see the transfer destination iPad, press the [Search]
button to search your network. The [Search] button is enabled when a file to be transferred has been
selected.
•
[Send] Button
Sends the selected file(s) to the selected iPad.
•
[Close] Button
Closes the File Transfer application.
14. Audio Processor MRX7-D
208 | ProVisionaire Design V1.2 User Guide