User Manual

Table Of Contents
4.3. [View] menu
Command Toolbar
button
Summary Dialog box that appears
Area display
switch check box
--- Add a check mark to the check box to display the
corresponding area. The contents of the
displayed area vary depending on the sheet and
device.
---
[Zoom In] Magnifies the display within the sheet. ---
[Zoom Out] Shrinks the display within the sheet. ---
[Zoom to 100%] Sets the display zoom within the sheet to 100%. ---
[Zoom to Fit] Adjusts the magnification so that all placed
objects are visible in the sheet.
---
[Editor
Magnification]
Adjusts the magnification ratio for Component
Editor.
---
[Print Area] --- On the sheet, shows the paper size specified in
the "Print" dialog box. The (x,y) = (0,0) of the sheet
is the top left of the paper.
---
4.4. [System] menu
Command Toolbar
button
Summary Dialog box that appears
[Network Setup] --- Selects the computer’s network adapter that will
be used to communicate with the devices.
You can also change the IP address of the
network adapter.
"Network Setup" dialog box
[IP Settings] --- Lists the devices on the network, allowing you to
change their IP address.
"IP Settings" dialog box
[Match Device by
IP Address]
--- Makes settings so that ProVisionaire Design
searches for devices by their IP address.
Make this setting if the computer is on a different
subnet than the devices.
"Match Devices by IP
Address" dialog box
[Device
Information]
--- Lists the devices on the network, allowing you to
update their firmware, or initialize or restart them.
"Device Information" dialog
box
[Word Clock] --- Specifies the word clock for the device. "Word Clock" dialog box
[Protect Devices] --- Specifies the Administrator PIN for the device to
prevent unintended modifications.
"Protect Devices" dialog box
[Clock] --- Regardless of the online/offline state, the time
and date will be updated for all devices connected
to the same network.
"Clock" dialog box
[Daylight Saving
Time]
--- Regardless of the online/offline state, the daylight
saving time setting is specified for all devices
connected to the same network.
"Daylight Saving Time" dialog
box
4. Menu bars and toolbar
32 | ProVisionaire Design V1.2 User Guide