User Manual

27.5. MRX7-D Setting Method
Double-click the DCP component and configure various settings.
For other operations, refer to the MTX5-D/MTX3 DCP Component Settings.
27.5.1. DCP Component Settings
Double-click the DCP component to open the component editor.
[Library]
Up to 32 DCP-related settings can be saved as a [Library].
The Library stores the settings for all DCPs connected to the MRX7-D.

The Library can be used on the DCP itself by recalling it at the same time as the MRX7-D
presets. Configure the settings in the dialog that appears when the [Recall Settings] button in
the Presets area is pressed.

When the Library is recalled, all DCPs (up to 8 units) connected to the MRX7-D will be recalled
at once.
When recalling a Library, any desired DCP can be excluded from the recall.
Click on the [Recall Filter] button in the Presets area and set the filter in the dialog that
appears.
For other operations, refer to the MTX5-D/MTX3 DCP Component Settings.
27. DCP
388 | ProVisionaire Design V1.2 User Guide