User Manual

▪ Overwrite/Insert
When set to [Insert], input in the Command text box becomes an insert, and hexadecimal
numbers can be added at the beginning or in the middle.
▪ Hex
Sets the command to control the device in hexadecimal.
▪ Clear
Deletes the command.
▪ Ascii
If commands to control the device are provided as character strings in the specifications,
etc., enter the commands and use the [Converter] button to convert them into hexadecimal.
▪ [Convert] Button
Converts commands in character strings into hexadecimal and enters them in "Hex".
• [Presets/Snapshots]
◦ Control Type
When Parameter Value Edit is selected
Sequentially numbered presets or snapshots can be assigned to a single device.
When Direct Parameter Value is selected
Multiple presets, snapshots, or snapshot groups can be assigned to the same switch at the same
time by repeating the assign operation. Presets for different devices can also be assigned at the
same time.

For the Rivage PM series and DM7 series, only the Direct Parameter Value can
be selected.

For the MRX7-D snapshot group, only the Direct Parameter Value can be
selected.
28. Wall-mount Controller: MCP1
412 | ProVisionaire Design V1.2 User Guide