User Manual

•
[All On] button
Adds a check mark to the [Device] check boxes of all devices in the device list.
•
[All Off] button
Clears the check mark from the [Device] check boxes of all devices in the device list.
•
Device list
This shows the devices that are registered in the project.
◦ [Device] check box
Add a check mark to each device that you want to synchronize.
•
Status
Indicates the state of synchronization with the device.
The indication has the following significance.
◦
Green: Offline
◦ White: Lost
"Lost" is a state in which ProVisionaire Design cannot find the device, such as because the device
is not powered-on.
◦
Blue: Online
◦
Yellow: Not compatible
•
Progress
Shows the progress of synchronization.
•
Message area
Details are shown in this area if you click the [Abort] button to stop the process or if an error occurs.
•
[Abort] button
Click this to stop synchronization.
•
[Online] button
Click this to begin synchronization with the selected devices.
•
[Close] button
Cancels synchronization and closes the dialog box.
This cannot be clicked during synchronization.
9.1.2. Procedure
1.
In the toolbar, click the [Online] button.
The "Synchronization" dialog box will appear.
2.
Choose either [To Device] or [From Device] to specify the direction in which synchronization will occur.
If you choose [To Device]
The settings of ProVisionaire Design will be transmitted to the devices, overwriting their settings.
If you choose [From Device]
The settings of the devices will be loaded into ProVisionaire Design.
3. Add a check mark for each device that you want to bring online.
4.
Click the [Online] button.
Synchronization will begin.
The synchronization progress is displayed.
If you click the [Abort] button, the operation will be halted. This can be a useful way to save time, for
example if you’ve noticed a mistake during synchronization and want to edit a parameter. The settings will
have been partially transmitted, so after you’ve made changes, be sure to complete synchronization to the
end.
When synchronization has ended successfully, the dialog box will close automatically.
9. Online and synchronization
ProVisionaire Design V1.2 User Guide | 57