User Manual

10.6. "File Storage" dialog box
To open this dialog box, click [File Storage] from the [File] menu on the menu bar. You can save the project file
from ProVisionaire Design to the DME7 unit.
Only one project file can be saved to each DME7 unit.
All DME7 units that are detected by ProVisionaire Design will be listed.
•
[Store] check box
Enables you to select a DME7 unit to which you wish to save the project file. You can select multiple
DME7 units.
If you execute the Save, Save As, or Save with Style command while ProVisionaire Design and the devices
are connected online, the project file will be automatically transferred and saved not only to the computer
but also to currently-selected multiple DME7 units.

Please be aware that at this time, the files that are currently stored on the devices will be
overwritten.
•
Unit ID / Model / Device Name
These columns indicate the device Unit ID, device model name, and device name.
To change the device name, use the [Device Name] field in the “Properties” area of the “Project” sheet.
•
Stored File
If any file is stored on the device, this field will indicate the name of the file.
If no file is stored on the device, this field will be empty. If no device is detected, this field will indicate “---.”
•
Date
If a file has already been stored on the device, this field will indicate the date and time at which the file
was updated.
If no file is stored on the device, this field will be empty. If no device is detected, this field will indicate “---.”
•
Total Size/Size
For a device, this field indicates the size of the save destination. For a file, this field indicates the file size.
If no device is detected, this field will indicate “---.”
•
Free Space
This field applies only to the device, and indicates the available space at the save destination.
If no device is detected, this field will indicate “---.”
•
[File Manager] button
Click this button to open the [File Manager] dialog box.
10. Dialog boxes
ProVisionaire Design V1.2 User Guide | 67