User Manual

ManualsBrandsYamaha ManualsInterfacesInput / output rack

Table Of Contents

ProVisionaire Design
Contents
1. Introduction
- 1.1. Information
- 1.2. Terms and concepts to understand
- 1.3. Operating requirements and installation
  - 1.3.1. Operating requirements
  - 1.3.2. Installation
- 1.4. An overview of ProVisionaire Design
2. Screen structure
- 2.1. Common to all sheets
- 2.2. "Project" sheet
- 2.3. Linked Presets
- 2.4. "Tuning" sheet for PC series/XMV series only
- 2.5. Device sheet
3. The basics of using ProVisionaire Design
- 3.1. Connecting the devices
- 3.2. Procedure
  - 3.2.1. If you can connect the device(s) to the computer
  - 3.2.2. If you cannot connect the device(s) to the computer
4. Menu bars and toolbar
- 4.1. [File] menu
- 4.2. [Edit] menu
- 4.3. [View] menu
- 4.4. [System] menu
- 4.5. [Tools] menu
- 4.6. [Arrange] menu
- 4.7. [Window] menu
- 4.8. [Help] menu
- 4.9. Buttons only on the toolbar
5. Shortcut keys
6. List of alerts
- 6.1. Power amplifiers
- 6.2. Processor
7. "Project" sheet
- 7.1. "Project" sheet
- 7.2. "Devices" area
- 7.3. "Network" area
  - 7.3.1. "Change Unit ID" dialog box
- 7.4. "Properties" area
- 7.5. Placing devices
- 7.6. Selecting multiple objects
- 7.7. Connecting ports
- 7.8. Duplicating devices
- 7.9. "Group" Editor
8. "Tuning" sheet
- 8.1. "Tuning" sheet
- 8.2. "Properties" area
- 8.3. "Project Devices" area
  - 8.3.1. [Amplifiers]
  - 8.3.2. [Speakers]
- 8.4. "Link Groups" area
9. Online and synchronization
- 9.1. Online
- 9.2. Offline
  - 9.2.1. "Offline" dialog box
10. Dialog boxes
- 10.1. Startup dialog box
- 10.2. "Go Online- From Devices" dialog box
- 10.3. "Protect File" dialog box
- 10.4. "Project Information" dialog box
- 10.5. "Print" dialog box
- 10.6. "File Storage" dialog box
  - 10.6.1. [File Manager] dialog box
- 10.7. "Network Setup" dialog box
- 10.8. "IP Settings" dialog box
- 10.9. "IP Address" dialog box
- 10.10. "Auto-Assign IP Addresses" dialog box
- 10.11. "Match Devices by IP Address" dialog box
- 10.12. "Device Information" dialog box
  - 10.12.1. “Detail>>” area
- 10.13. "Update Firmware" dialog box
- 10.14. "Initialize" dialog box
- 10.15. "Word Clock" dialog box
- 10.16. "Protect Devices" dialog box
- 10.17. "Clock" dialog box
  - 10.17.1. RM Series
  - 10.17.2. Non-RM Series
- 10.18. "Daylight Saving Time" dialog box
- 10.19. "GPI Calibration" dialog box
- 10.20. "Get Log from Devices" dialog box
- 10.21. "RM Series Settings" > "Sign up" dialog box
- 10.22. "RM Series Settings" > "Login" dialog box
- 10.23. "RM Series Settings" > "Password Settings" dialog box
- 10.24. "RM Series Settings" > "Enable SCP remote control access" dialog box
- 10.25. "Linked Presets Manager" dialog box
- 10.26. "Store Linked Preset" dialog box
- 10.27. Port Label Dialog
11. Context menus
- 11.1. Sheet tabs
- 11.2. "Project" sheet
- 11.3. Device sheet
  - 11.3.1. Components and component editors in the device sheet
12. Common operations for device sheets
- 12.1. Component editor operations
- 12.2. Editing the parameters
- 12.3. Registering parameters to ProVisionaire Control
13. Audio Processors: DME7
- 13.1. Overview
- 13.2. "Project" sheet
  - 13.2.1. Tool bar
  - 13.2.2. "Properties" area
- 13.3. Device sheet screen configuration
- 13.4. Basic use of ProVisonaire Designer
- 13.5. Tool buttons
- 13.6. "Components" area
- 13.7. Design sheet
- 13.8. Design sheet: Audio layer
  - 13.8.1. Audio Component
- 13.9. Design sheet: Control layer
- 13.10. Components other than audio or control components
- 13.11. “Parameter Sets” area
- 13.12. “Properties” area
- 13.13. "Parameters" area
- 13.14. Context Menu
- 13.15. Dialog box
- 13.16. Message List
14. Audio Processor MRX7-D
- 14.1. Overview
- 14.2. Project Sheet
- 14.3. Device Sheet Screen Configuration
- 14.4. Basic Use
- 14.5. Tool Buttons
- 14.6. Components Area
- 14.7. Design Sheet
- 14.8. Non-Audio Components
- 14.9. Parameter Sets Area
  - 14.9.1. Snapshot Group
  - 14.9.2. Steps to create a snapshot group
- 14.10. Presets Area
  - 14.10.1. Procedure
- 14.11. Parameter Link Group Area
  - 14.11.1. Link Control Editor
- 14.12. Gang Edit Group Area
  - 14.12.1. Procedure
- 14.13. Properties Area
- 14.14. Parameters Area
- 14.15. Context Menu
- 14.16. Dialog
- 14.17. Component Editor
- 14.18. Alert List
- 14.19. Flow of Paging Configuration
15. Audio Processors: MTX5-D/MTX3
- 15.1. Overview
- 15.2. "Project" sheet
  - 15.2.1. "Devices" area
  - 15.2.2. "Properties" area
- 15.3. Device sheet screen configuration
- 15.4. Tool buttons
- 15.5. "Presets" area
  - 15.5.1. Recall
- 15.6. Context menus
  - 15.6.1. MTX5-D sheet/MTX3 sheet
  - 15.6.2. Components/in the MTX/component editor
- 15.7. Dialog box
- 15.8. Alert list
- 15.9. Component editors
- 15.10. Workflow for paging settings
16. MTX I/O Expanders: EXi8 / Exo8
- 16.1. Overview
- 16.2. "Project" sheet
- 16.3. Editor
17. Power Amplifiers: PC-series
- 17.1. Overview
- 17.2. "Project" sheet
- 17.3. "Tuning" sheet
- 17.4. Device sheet screen configuration
- 17.5. "Presets" area
  - 17.5.1. "Store Preset" dialog box
- 17.6. Context Menu
- 17.7. Alert list
- 17.8. Component editors
18. Power Amplifiers: XMV-series
- 18.1. Overview
- 18.2. "Project" sheet
  - 18.2.1. "Properties" area
- 18.3. Tuning Sheet
- 18.4. Device sheet screen configuration
- 18.5. Context Menu
- 18.6. Alert list
- 18.7. Component editors
19. I/O Interface: Rio3224-D2 / Rio1608-D2
- 19.1. Overview
- 19.2. "Project" sheet
- 19.3. Editor
- 19.4. Context menu
20. I/O Interface: Tio1608-D / Tio1608-D2
- 20.1. Overview
- 20.2. "Project" sheet
- 20.3. Editor
21. I/O Interface: RSio64-D
- 21.1. Overview
- 21.2. "Project" sheet
- 21.3. Editor
22. Powered Speakers: VXL1-16P
- 22.1. Overview
- 22.2. "Project" sheet
- 22.3. Device sheet screen configuration
- 22.4. Component editors
23. Microphones: PGM1
- 23.1. Overview
- 23.2. "Project" sheet
- 23.3. "Properties" area
24. Microphones: RM-CG
- 24.1. Overview
- 24.2. "Project" sheet
- 24.3. [System] menu
- 24.4. "Network" area
- 24.5. "Properties" area
- 24.6. Device sheet screen configuration
- 24.7. Tool buttons
- 24.8. Component editors
25. Microphones: RM-TT
- 25.1. Overview
- 25.2. "Project" sheet
- 25.3. [System] menu
- 25.4. "Network" area
- 25.5. "Properties" area
- 25.6. Device sheet screen configuration
- 25.7. Tool buttons
- 25.8. Component editors
  - 25.8.1. "Microphone Settings" component editor
26. External Device: Speakers
- 26.1. Overview
- 26.2. "Project" sheet
- 26.3. "Properties" area
- 26.4. "Recall Speaker Preset(s)" dialog box
27. DCP
- 27.1. Overview
- 27.2. How to select the DCP to be connected
- 27.3. Setting method for DME7
- 27.4. Setting method for MTX5-D/MTX3
- 27.5. MRX7-D Setting Method
28. Wall-mount Controller: MCP1
- 28.1. Overview
- 28.2. Project Sheet
  - 28.2.1. Properties Area
- 28.3. Setting Method
- 28.4. Component Editor
- 28.5. Alert List
29. YDIF
- 29.1. YDIF
- 29.2. YDIF setting method (Project sheet)
- 29.3. YDIF setting method (device sheets)
30. Settings for controlling devices across subnets

■ For the RM-CG/RM-TT

■ For the VXL1-16P

10. Dialog boxes

ProVisionaire Design V1.2 User Guide | 77