Manualshelf

User Manual

ManualsBrandsYamaha ManualsInterfacesInput / output rack
919293949596979899100
Table Of Contents
10.18. "Daylight Saving Time" dialog box
To open this dialog box, click [Daylight Saving Time] from the [System] menu on the menu bar.
This specifies the daylight saving time setting of the devices connected to the same network, regardless of their
online/offline state.
The target device is the DME7/MTX series.
For RM series units, use the “Clock” dialog box to make the settings.
•
Device List
Displays the current device status.
•
[Enable Daylight Saving Time] check box
Daylight saving time will be enabled if this check box is selected.
If the “Automatically adjust daylight saving time” check box is selected in the
computer’s “Date and Time” settings, you must also select the [Enable Daylight Saving
Time] check box in the “Daylight Saving Time” dialog box.
◦ Offset
Specifies the amount of time by which daylight saving time is earlier than standard time.
◦ Start time
Specifies the time when daylight saving time begins.
For example if you set Offset as 01:00 and Start time as 12:00, the clock will be set to 13:00 when
the time reaches 12:00 of the day on which daylight saving time begins.
10. Dialog boxes
ProVisionaire Design V1.2 User Guide | 97