User Manual

•
End time
Specifies the time when daylight saving time ends. If this is the same as the start time, select [Same as
Start time].
For example if you set Offset as 01:00 and End time as 12:00, the clock will be set to 11:00 when daylight
saving time reaches 12:00 on the last day of daylight saving time. If the [Same as Start time] check box is
selected, daylight saving time will automatically be cancelled and revert to standard time on the last day
of daylight saving time at the time specified by the Start time.
◦ Day of the week
If this is on, the term of daylight saving time will be specified as a day of the week. Use Start and
End to specify which day of which week will be the start and end of daylight saving time. For
example to specify the first Sunday in April, choose “First,” “Sunday,” and “April”; to specify the last
Sunday in October, choose “Last,” “Sunday,” and “October.”
◦ Day
If this is on, the term of daylight saving time will be specified as a day of a month. Use Start and
End to specify the dates that will be the start and end of daylight saving time.
◦ [Update Now] button
When you click this, the device’s internal clock is updated according to the settings.
◦ [Close] button
Closes the dialog box.

Events that are assigned within two hours before or after the beginning or end of daylight
saving time in the “Scheduler” dialog box will not be executed correctly.
10. Dialog boxes
98 | ProVisionaire Design V1.2 User Guide