User Manual

In this example, we keep the default settings.
All settings can be changed later in Properties under Controller.
Tips
If you don’t know the aspect ratio of the screen, select [3:2] and place the widgets accordingly.
Once the aspect ratio has been finalized, reconfigure the screen size in Properties under Controller.
5. Select the Style file to be used when creating the controller and click the [Next] button.
6. Make the following settings, and click the [Add] button.
•
Match Device by
Unit ID: Matches the device by using the Unit ID/Device ID as a key.
IP Address: Matches the device by using the IP address as a key.
•
Count
If “Match Device by” is set to “Unit ID”, you can register multiple devices at once. The devices are
registered sequentially starting from the Unit ID.
The DM7 whose Unit ID is 1 is added to the “Devices” area, and the dialog box closes.
4. Basic process
12 | ProVisionaire Control PLUS V1.0 User Guide