User Manual

Property Value
[Display Aspect Ratio]
Screen ratio (horizontal:vertical)
Adjust the screen ratio to match that of the device on which Kiosk will be
run.
When you select Custom, directly enter the Horizontal and Vertical values.
You can change the screen ratio during creation of the controller.
[Horizontal] Specifies the horizontal size of the controller when Display Aspect Ratio is
set to Custom.
You can change the screen ratio during creation of the controller.
[Vertical] Specifies the vertical size of the controller when Display Aspect Ratio is
set to Custom.
You can change the screen ratio during creation of the controller.
[Display Size]
The diagonal length of the controller.
Adjust the display size to match that of the device on which Kiosk will be
run.
[90-degree rotation] Select (Yes) to swap the vertical and horizontal dimensions of the
controller.
The orientation of the placed widgets does not change.
[Open with Full Screen Style] Select (Yes) to display the Kiosk in full screen.
Pass code
[Pass Code Setting] Select the code set in the “Setup” dialog box (Use Project Pass Code) or
the code set for each controller (Use Controller Pass Code) as the
passcode to be used in Kiosk.
When [Use Controller Pass Code] is selected, you will be able to edit
[Administrator Code], [Power User Code], and [Unlock Code].
[Administrator Code] These codes become editable when [Use Controller Pass Code] is
selected in [Pass Code Setting].
Click on Value to display the edit screen.
[Power User Code]
[Unlock Code]
ProVisionaire Edge
[ProVisionaire Edge Setting] For each controller, this selects whether settings for ProVisionaire Edge
will use the settings specified in the “Setup” dialog box (Use Project
Setting) or the settings specified in the controller’s properties (Use
Controller Setting).
When [Use Controller Setting] is selected, you will be able to edit
[Destination ProVisionaire Edge] and [Destination ProVisionaire Edge IP
Address].
[Destination ProVisionaire Edge] This property becomes editable when [Use Controller Setting] is selected
in [ProVisionaire Edge Setting].
Select whether to acquire the ProVisionaire Edge data to be displayed in
the [System Monitor] widget from the same computer as Kiosk (This PC)
or acquire it from a different computer (Other PC).
[Destination ProVisionaire Edge IP
Address]
This property becomes editable when [Use Controller Setting] is selected
in [ProVisionaire Edge Setting] and Other PC is selected in [Destination
ProVisionaire Edge]. Set the IP address of the computer on which
ProVisionaire Edge is installed.
10. “Controllers” area
ProVisionaire Control PLUS V1.0 User Guide | 45