User Manual
Table Of Contents
●Tips for network settings
1. The IP addresses of the devices you’re connecting must be set to the same subnetwork.
- Example of a correct
combination of settings
Example of an incorrect
combination of settings
The Wi-Fi access point
device’s internal router and
DNS *1
192.168.0.254 192.168.11.1
Target system 192.168.0.1 192.168.0.1
iPad 192.168.0.200 192.168.11.50
Computer 192.168.0.253 192.168.11.253
*1 If the Wi-Fi access point does not have router functionality, specify the IP address for accessing the Wi-
Fi access point device.
2.
Connect the target devices to a LAN port of the Wi-Fi access point.
If you connect it to the Ethernet port (WAN port), it will be impossible to communicate correctly between
the smart device and the target devices.
3.
Start ProVisionaire Kiosk.
ProVisionaire Touch detects the target devices and connects automatically.
When ProVisionaire Kiosk and the device are connected, the online indicator turns green.
4. Connection
ProVisionaire Kiosk V1.0 User Guide | 9