User Manual

4.2. Windows
4.2.1. Connecting to target devices
Use a Cat5e cable to connect target devices to the switch.
■ Example of network settings for target devices
1.
Set the IP address of each device.
For setup instructions, refer to the instruction manual of each device.
If there are multiple target devices, make sure that the IP addresses of the devices do not overlap.
2.
Set the IP address of your computer to the same network (subnet) as the device.
Make sure that the IP address does not overlap with the IP addresses of the target devices.
3. Connect the computer and all the target devices to the switch.
The maximum number of ProVisionaire Kiosks that can be connected to a device varies depending on the
device.
Refer to the instruction manual of each device.
■ Network settings for ProVisioniare Kiosk
1. Click the [Setup] button on the title bar and open the Network tab.
4. Connection
10 | ProVisionaire Kiosk V1.0 User Guide