User Manual

4. Connection
4.1. iOS/iPadOS
4.1.1. Wi-Fi access point settings
Specify the Wi-Fi access point as described in the owner’s manual of each device.
Although there is no need to make special settings, we recommend that you use security such as WPA in order
to prevent unauthorized access to the network from outside.
Guidelines for settings are provided below.
1. Specify the name of the Wi-Fi network.
2. Specify the security mode (e.g., WPA2) and password.
3. Select the wireless mode. (such as 802.11n or 802.11g)
4. If possible, enable “Auto Channel Selection.”
The wireless channel with the least interference will be selected.
For the fastest communication between the iPad/iPhone and the Wi-Fi access point, we recommend that you
select an 802.11n network. If you use multiple external antennas, it will be easier to connect to the Wi-Fi access
point.
In addition, we recommend that you make stealth mode and MAC address filter settings to increase security.
4.1.2. Connecting to the target system
Use CAT5e cables to connect the target system with the Wi-Fi access point.
Include an Ethernet switch in the system if necessary.
4. Connection
6 | ProVisionaire Kiosk V1.0 User Guide