User Manual

R Remote Version 5.9 User’s Guide 34
Network Settings
When setting up, refer to the description in the “Specify the computer's IP address.”
If the device is controllable from the R Remote, you can perform the update.
For specific instructions and cautions when connecting the devices, refer to the following web site:
https://www.yamahaproaudio.com//
R Remote Firmware Updater
Each device has firmwares for the device and for Dante. Both of firmwares can be updated by the R Remote.
Below are the windows of the R Remote Firmware Updater that appear when updating the firmware.
When the device to be updated is a domain member of the DANTE DOMAIN MANAGER, the device’s Dante
firmware cannot be updated.
When loading firmware including Brooklyn2 and Brooklyn3
① File Path (File selection area)
Select the firmware file to be updated (displayed here). (Tio1608-D2 shares files with Tio1608-D.
Firmware prior to V2 cannot be updated.) When updating Tio1608-D2, make sure the Tio1608-D
Compatibility Mode is disabled.
② Firmware Info (File information area)
Displays information of the selected firmware.
③ Updatable Devices (Device information area)
Displays information about the devices to be updated.
Displays the device label, the firmware version (Model and Dante) and the status. When the device is a
domain member of the DANTE DOMAIN MANAGER, the Dante firmware version is not displayed since
the information cannot be retrieved.