User Manual

③ Delay Time knob (“Delay Matrix” only)
Specifies the delay time from each input channel to the output bus. You can select the units in the
Type list box.
④ Type list box (“Delay Matrix” only)
The delay time specified by the Delay Time knob is converted into the units you select.
• ms………. Milliseconds
• sample…… Number of samples (The range will depend on the sampling frequency setting.)
• meter……. Meters/second
• feet…….. Feet/second
⑤ Fader
Specifies the send level from each input channel to the output bus.
If there are many channels, a scroll bar will be displayed at the bottom.
⑥ [OUTPUT CHANNEL] list box
Switches the output channel being set.
⑦ Output port name
Shows or edits the output port name.
This is linked with the “Label” of the component’s ports.
⑧ [Tools]
Sets the send level from all input channels to [On], [Off], [Nominal], [–3 dB], [–6 dB], or [Minimum].
⑨ Input port name
Shows or edits the input port name.
This is linked with the “Label” of the component’s ports.
2.34.4. Control
Delay Matrix / Matrix Mixer
Parameter types of the input/output values for each Port
Input Value Control Parameter Output Value
Type Range Input
Port
Name
Paramete
r Range
Output
Port
Name
Type Range
Value Num 0,1 ● Out1
On In 1
OFF:0,
ON:1
● Out1
On In 1
Value Num
OFF:0,
ON:1
Value dB −∞–10.00 ● Out1
SendLevel
In 1
−∞–10.00 ● Out1
SendLevel
In 1
Value dB −∞–10.00
Normalized 0.00–1.00
2. Audio Components
ProVisionaire Design Component Guide | 99