User Manual

2.35.1. “Dugan Automixer” component editor
Main control field
① Channel display
For input channels 1–8, 9–16, 17–24, 25–32, 33–40, 41–48, 49–56, and 57–64, this area shows each
channel’s automix gain (Automix gain) meter and the man (yellow) / auto (green) / mute (red) status.
When you select the region of channels 1–8, 9–16, … or 57–64, the channels displayed in the channel
control field switch between 1–8, 9–16, … and 57–64.
② [OVERRIDE] button
This function instantly mutes all mics except for a specific mic, such as the mic of the chair or head.
If this is on, channels whose [override] button is on are set to “man,” and channels whose [override]
button is off are set to “mute.”
For the specified mic, such as of the chair or head, click the [override] button in the channel strip to
make it light yellow. Press the button once again to return to the previous setting.
③ [MUTE] button
Turns mute on/off for all mics in the group.
④ [reset] button
Resets the various parameters to their default values.
⑤ [meters] button
Switches the meter display of the channel control field between gain/input/output.
When using [weight] to adjust the relative sensitivity between the input channels, switching
the meter display to “gain” lets you use the channel control field to adjust the gain amount, providing
better visibility.
Channel control field
This is color-coded by group.
Channels of the same group are mixed.
2. Audio Components
ProVisionaire Design Component Guide | 101