User Manual

2.39. Router
This component distributes inputs to output ports. Although one input can be output to multiple
channels, multiple inputs cannot be output to a single channel.
Select the number of channels (maximum 256In/256Out) when you place this component in the design
sheet. The number of Dante Input/Output channels is determined by the number of activated device
licenses. In the explanation here, the illustration shows the example of 8 input channels and 16 output
channels.
2.39.1. “Router” component editor
Here you can specify how the signals are distributed.
① [CLEAR] button
Turns all outputs off.
② Router
This is a router that distributes the signals. Click a square in the grid to switch the output on/off.
When you double-click a port name display area located above or to the left of the router, a window
opens, allowing you to edit the name of the port.
The grid squares can also be registered in a Parameter Set or Remote Control List by holding
down <Ctrl> key on the computer keyboard and dragging and dropping.
2. Audio Components
ProVisionaire Design Component Guide | 109