User Manual

② Gain Reduction indicator
This will light when the threshold value is exceeded.
③ [Threshold] knob
Specifies the threshold level at which the Limiter is applied.
④ [Attack] knob
Specifies the speed at which the limiter will take effect.
⑤ [Release] knob
Specifies the speed at which the limiter will release.
⑥ [GR] meter
Indicates the amount of gain reduction.
⑦ [Impedance/Unit] knob
Specifies the nominal impedance of the speaker.
Even when connecting multiple speakers in parallel, specify this as the impedance of one unit.
2.41.2. Control
Parameter types of the input/output values for each Port
Input Value Control Parameter Output Value
Type Range Input
Port
Name
Paramete
r Range
Output
Port
Name
Type Range
Value Num 0,1 ●
PeakLimit
er On
OFF:0,
ON:1
●
PeakLimit
er On
Value Num
OFF:0,
ON:1
Value dB −∞–10.00 ●
PeakLimit
er
Threshold
−∞–10.00 ●
PeakLimit
er
Threshold
Value dB −∞–10.00
Normalized 0.00–1.00
- - - -
OFF:0,
ON:1
●
PeakLimit
er
Exceeded
Value Num
OFF:0,
ON:1
Value Num 0,1 ●
RMSLimit
er On
OFF:0,
ON:1
●
RMSLimit
er On
Value Num
OFF:0,
ON:1
Value dB −∞–10.00 ●
RMSLimit
er
Threshold
−∞–10.00 ●
RMSLimit
er
Threshold
Value dB −∞–10.00
Normalized 0.00–1.00
- - - -
OFF:0,
ON:1
●
RMSLimit
er
Exceeded
Value Num
OFF:0,
ON:1
2. Audio Components
ProVisionaire Design Component Guide | 119