User Manual

3.22. Processing: Suspend
This is a control component to temporarily stop the output of the input signal.
(For 2 inputs)
INPUT
1: Channel 1 input value
2: Channel 2 input value
On1: Input value to control the channel 1 button (OFF:0, ON:1) (*)
On2: Input value to control the channel 2 button (OFF:0, ON:1) (*)
OUTPUT
1: Channel 1 input value
2: Channel 2 input value
On 1: Output value when the channel 1 button is switched (OFF:0, ON:1) (*)
On 2: Output value when the channel 2 button is switched (OFF:0, ON:1) (*)
* is displayed when the Parameters Control PINs are checked.
3.22.1. “Suspend” component editor
① When this is ON, the signal output is stopped.
Parameter types of the input/output values for each Port
Input Value Operation Output Value
Type Range Input
Port
Name
Trigger/P
rocessing
Output
Port
Name
Type Range
Through ● CH
(1,2..)
Processin
g:
Suspend
● CH
(1,2..)
Same value as the Input Value
Value Num
OFF:0,
ON:1
● On
(1,2..)
● On
(1,2..)
Value Num
OFF:0,
ON:1
3. Control Components
156 | ProVisionaire Design Component Guide