User Manual

2.7. Combiner: Room Combiner, Room Combiner plus Automixer
This function is used when audio signals are shared between multiple rooms, or when a single room is
partitioned in varying ways. The audio signal outputs are changed according to how the rooms are
divided or connected. The DME7 provides two types of combiner: “Room Combiner” and “Room
Combiner plus Automixer.” The latter adds Dan Dugan Automixer functionality. Up to eight rooms can
be registered in the combiner, and you can also specify the shape of the rooms as their actual shape.
You can register snapshots in a remote controller such as a DCP, and recall parameters as appropriate
for the state of the rooms.
Here we explain using “Room Combiner plus Automixer.”
When you drag this from the “Components” area and drop it on the design sheet, a dialog box appears,
allowing you to design the room.
After the Combiner components have been placed, the number of rooms and number of MICs
cannot be changed from Properties.
Drag the cells to create the room. When you click a cell that makes up a room, the room is canceled;
when you drag from a cell that makes up a room to a cell that is not part of a room, the room is
extended. Create the rooms, and then click the [Next] button. The screen changes to a screen where
you can reassign the room numbers.
2. Audio Components
ProVisionaire Design Component Guide | 21