User Manual
Table Of Contents
- How to Use This Reference Manual
- Contents
- Function Tree
- SELECTED CHANNEL section
- Centralogic section
- Input and output patching
- Input channels
- Signal flow for input channels
- Specifying the channel name, icon and channel color
- Making HA (Head Amp) settings
- Sending a signal from an input channel to the STEREO/MONO buses
- Sending a signal from an input channel to a MIX/ MATRIX bus
- Correcting delay between channels (Input Delay)
- Channel library operations
- Output channels
- EQ and Dynamics
- Grouping and linking
- Scene memory
- About scene memories
- Using scene memories
- Editing scene memories
- Using the Global Paste function
- Using the Focus function
- Using the Recall Safe function
- Using the Fade function
- Outputting a control signal to an external device in tandem with scene recall (GPI OUT)
- Playing back an audio file that links to a scene recall
- Using Preview mode
- Monitor and Cue functions
- Talkback and Oscillator
- Meters
- Graphic EQ, effects, and Premium Rack
- I/O device and external head amp
- MIDI
- User settings (Security)
- Recorder
- Help function
- Other functions
- About the SETUP screen
- Word clock and slot settings
- Using cascade connections
- Basic settings for MIX buses and MATRIX buses
- Switching the entire phantom power supply on/ off
- Specifying the brightness of the touch screen, LEDs, channel name displays, and lamps
- Setting the date and time of the internal clock
- Setting the network address
- Initializing the unit to factory default settings
- Adjusting the detection point of the touch screen (Calibration function)
- Adjusting the faders (Calibration function)
- Fine-tuning the input and output gain (Calibration function)
- Adjusting the channel color (Calibration function)
- Adjusting the brightness of the channel name display
- Adjusting the contrast of the channel name display
- Dante audio network settings
- Using GPI (General Purpose Interface)
- Appendices
- EQ Library List
- DYNAMICS Library List
- Dynamics Parameters
- Effect Type List
- Effects Parameters
- Premium Rack Processor Parameters
- Effects and tempo synchronization
- Parameters that can be assigned to control changes
- NRPN parameter assignments
- Mixing parameter operation applicability
- Functions that can be assigned to USER DEFINED keys
- Functions that can be assigned to USER DEFINED knobs
- Functions that can be assigned to the assignable encoders
- MIDI Data Format
- Warning/Error Messages
- Electrical characteristics
- Mixer Basic Parameters
- M IDI Implementation Chart
- Index
Input and output patching
Reference Manual
22
INSERT/DIRECT OUT popup window (8ch)
1 Channel select button
Selects the channel to set. The channel icon, color, and number appear on the button.
2 INSERT OUT button
Press this button to open the PORT SELECT popup window, in which you can select an output
port. The name of the currently-selected port appears on the button.
3 INSERT ON/OFF button
Switches the insert on or off. The currently-specified insert point setting appears above the
button.
4 INSERT IN button
Press this button to open the PORT SELECT popup window, in which you can select an input
port. The name of the currently-selected port appears on the button. You can also view the insert-
in level by checking the indicator located to the right of the port button (that is displayed as an
option).
4. Access either the one-channel or the eight-channel INSERT/DIRECT OUT popup
window, and then press the INSERT OUT button.
The PORT SELECT popup window will appear, allowing you to select the output port used for
insert-out. The window includes the following items.
1 Category select list
Selects the category of output port shown in the popup window. The categories correspond to the
following output ports. They vary depending on the channel type.
• OMNI ..........................................OMNI1–OMNI8
• SLOT1 ......................................... SLOT1(1)–SLOT1(16)
• SLOT2 ......................................... SLOT2(1)–SLOT2(16)
• SLOT3 ......................................... SLOT3(1)–SLOT3(16)
• GEQ RACK ................................ GEQ1L(A)–GEQ16R(B) (MIX, MATRIX, STEREO, and
MONO channels only)
• EFFECT RACK..........................FX1L(A)–FX8R(B)
• PREMIUM RACK..................... PR1L(A)–PR8R(B)
2 Output port select buttons
These buttons assign the output port that will be used as insert-out for the currently-selected
channel.
NOTE
If a rack in which a GEQ or Premium Rack is mounted is specified as the insert-out or insert-in,
the other patch point will automatically be assigned to the same rack. Also, insert mode will
automatically be switched on. Additionally, if you defeat the insert-out or insert-in of a rack in
which a GEQ or Premium Rack is mounted, the other patch point will automatically be defeated
and at the same time insert mode will automatically be switched off.
1
4
3
2
1
2