User Manual
Table Of Contents
- Getting Started
- Main window
- Overview window
- Selected Channel window
- Library window
- Premium Rack Library window
- Patch Editor window
- Virtual Rack window
- Meter window
- Group/Link window
- Scene window
- Custom Fader Bank Setup window
- Custom Fader Bank window
- User Defined Keys Setup window
- User Defined Knobs Setup window
- Sends On Fader window
- Outport Setup window
- Keyboard Shortcuts
- Index
CL Editor Owner’s Manual
47
❏ TO STEREO/MONO
Here you can specify how the signal will be sent from the MIX channel to the STEREO bus/MONO bus.
In Surround mode (➥ p.3), use MIX channels 1–6 to set up a downmix.
MODE
• ST/MONO button
When this button is on, the signal will be sent to the STEREO bus and independently to the MONO bus.
• LCR button
When this button is on, the signal will be sent to the L/C/R buses which work in conjunction with each other.
• Surround mode indicator (only for MIX channels 1–6)
PAN (BALANCE for
STEREO bus)
The PAN knob adjusts the panning of the signal sent from the MIX channel to the STE-
REO bus L/R channels. You can set this to the center position by holding down the
<Ctrl>(< >) key of the computer keyboard and clicking the knob. If the selected MIX bus
is used as a stereo bus, this will be the BALANCE. The BALANCE knob adjusts the bal-
ance of the signal that is sent from the MIX channel to the STEREO bus L/R channels.
ST Switches the signal sent from the MIX channel to the STEREO bus on/off.
M(C) Switches the signal sent from the MIX channel to the MONO bus on/off.
PAN (BALANCE for
STEREO bus)
The PAN knob adjusts the panning of the signal that is sent from the MIX channel to each
of the L/C/R channels. You can set this to the center position by holding down the
<Ctrl>(< >) key of the computer keyboard and clicking the knob. If the selected MIX bus
is used as a stereo bus, the panning will be fixed to L63 on the odd channel and to R63 on
the even channel. If the selected MIX bus is used as a stereo bus, this will be the BAL-
ANCE. The BALANCE knob adjusts the balance of the signal that is sent from the MIX
channel to the STEREO bus L/R channels.
CSR (Center Side Ratio)
Adjusts the proportion of the CENTER channel level relative to the STEREO bus L/R in a
range of 0–100%.
LEVEL
Use the LEVEL knob to adjust the downmix coef-
ficient.
L
This is an on/off switch for signals sent from the
MIX channel to the L channel of the STEREO
bus.
R
This is an on/off switch for signals sent from the
MIX channel to the R channel of the STEREO
bus.
[for MONO mix channel] [for STEREO mix channel]
[for MONO mix channel] [for STEREO mix channel]