User Manual
Table Of Contents
- Contents
- PRECAUTIONS
- Introduction
- About Dante
- Controls and Functions
- Display Operations
- Operation Flow
- Menu structure
- Selecting menu items
- About the parameter display
- Selecting ports
- About port names
- METER menu
- GAIN menu
- +48V ON menu
- HPF ON menu
- HPF F menu
- GC (Gain Compensation) ON menu
- About the status indication
- SETUP menu
- Status bar
- INFORMATION menu
- Support for Dante Domain Manager (DDM) (V1.10 or later)
- Other functions
- About Connections
- Head Amp Control
- Troubleshooting
- Specifications
Support for Dante Domain Manager (DDM) (V1.10 or later)
Owner’s Manual
23
INFORMATION – REPORT screen
Enrolling a domain
* Local Access = Read Only, Remote Access = None
No DDM server
1 DDM_CONNECT_STATE
Displays the connection status to the DDM server in the network.
• CONNECTED: The unit has been connected to the DDM server in the network.
• DISCONNECTED: There is no DDM server in the network.
2 DDM_DOMAIN_KIND
Displays the enrolling status for the DDM domain.
•DOMAIN: DDM domain is enrolled
• UNMANAGED: DDM domain is not enrolled
3 DDM_DOMAIN_UUID
Displays the UUID of an applicable domain when enrolling the DDM domain.
When the unit has not enrolled a domain, FF–FF–FF–FF–FF–FF–FF–FF–FF–FF–FF–FF–FF–FF–FF–FF is displayed.
4 DDM_LOCAL_ACCESS
Displays the accessing status of the Dante setup (including the DANTE PATCH settings) of the unit.
• READ_WRITE: Editing is available
• READ_ONLY: Editing is disabled
5 DDM_REMOTE_ACCESS
Displays the status of Dante setup accessing the external Dante device.
• OPERATOR: Editing is available
(however, operating from the Rio-D2 unit is not available)
• GUEST: Reading is available, editing is disabled
• NONE: Reading and editing are disabled