User Manual

4. Open the MTX5-D’s “Input Patch” component editor.
Assign D1 to Input Channel 1.
Assign D2-D4 to input channels 2-4 in the same way.
5.
Open the MTX5-D’s “ZONE” component -→ “Paging” component editor.
Select “CH1:CH1” for 1st Mic of PAGING SOURCE.
Select others as well.
6. Assign functions to buttons in the "PGM1/PGX1" editor that appears when you click the [Settings]
button.
As necessary, set the ZONE GROUP in the “ZONE GROUP” editor that appears when you click the [ZONE
GROUP] button.
For the "PGM1/PGX1" editor and "ZONE GROUP" editor, refer to the respective explanations.
14. Audio Processors : MTX5-D/MTX3
ProVisionaire Design User Guide | 239