User Manual

166
– Bedienungsanleitung
Specifications
Specifications
General Specifications
Digital I/O Characteristics
Control I/O Characteristics
External DC Input Characteristics
*1: Power Requirements: +24V±2V, 3A
*2: 1pin=GND, 2pin=NC, 3pin=NC, 4pin=+24V
* The contents of this manual apply to the latest specifications as of the printing date. Since Yamaha makes continuous improvements to the product, this
manual may not apply to the specifications of your particular product. To obtain the latest manual, access the Yamaha website then download the manual
file. Since specifications, equipment or separately sold accessories may not be the same in every locale, please check with your Yamaha dealer.
Sampling Frequency
External Clock
Frequency Range
44.1 kHz +4.1667 %/+0.1 %/-0.1 %/-4.0 % ±200 ppm
48 kHz +4.1667 %/+0.1 %/-0.1 %/-4.0 % ±200 ppm
88.2 kHz +4.1667 %/+0.1 %/-0.1 %/-4.0 % ±200 ppm
96 kHz +4.1667 %/+0.1 %/-0.1 %/-4.0 % ±200 ppm
Signal Delay
SLOT IN (MY8-AE96) to SLOT OUT (MY8-AE96)
(@ fs=96 kHz, SRC off, Internal routing)
Less than 0.2 ms
SLOT IN (MY8-AE96) to Rio3224-D AES OUT
(@ fs=48 kHz, through Dante, SRC off)
(Dante Receive Latency set to 0.25 ms)
Less than 0.8 ms
SLOT IN (MY8-AE96) to Rio3224-D AES OUT
(@ fs=96 kHz, through Dante, SRC off)
(Dante Receive Latency set to 0.25 ms)
Less than 0.5 ms
SLOT IN (MY8-AE96) to Rio3224-D AES OUT
(@ fs=96 kHz, through Dante, SRC on, SLOT fs=48 kHz)
(Dante Receive Latency set to 0.25 ms)
Less than 1.1 ms
SRC
SRC Lock Range: 39.7 kHz – 101.7 kHz
Sample Rate Ratio Limit: 1:2.6 to 2.6:1
Dimensions (W x H x D) and Net Weight 480 x 88 x 365 mm, 6.1 kg
Power Requirements (wattage) 60 W
Power Requirements (voltage and hertz) 100-240 V 50/60 Hz
Temperature Range
Operating temperature range: 0 – 40 °C
Storage temperature range: -20 – 60 °C
Included Accessories Owner’s Manual, AC power cord
Terminal Format Data Length Level Audio I/O Connector
Primary/Second-
ary
Dante 24 bit or 32 bit 1000 BASE-T
64 ch Input/64 ch Output@48
kHz
32 ch Input/32 ch Output@96
kHz
etherCON
CAT5e
Terminal Format Level Connector
WORD CLOCK IN — TTL/75 Ω terminated BNC
Terminal Format Level Connector
EXT DC INPUT
*1
——
XLR-4-32 type
*2