User Manual

MIX
Adjusts the mix between dry signal and wet signal, preserving the transients of the input signal.
RATIO
Toggles between a low and a high ratio value.
SC(Side-Chain)
Activates the internal side-chain filter. The input signal can then be shaped according to the
filter parameters. Internal side-chaining can be useful for tailoring how the gate operates.
Side-Chain Section
FILTER TYPE (Low-Pass/Band-Pass/High-Pass)
If [Side-Chain] is activated, these buttons allow you to set the filter type to low-pass, band-
pass, or high-pass.
Center (50 to 20000 Hz)
If [Side-Chain] is activated, this sets the center frequency of the filter.
Q-FACTOR
If [Side-Chain] is activated, this sets the resonance or width of the filter.
MONITOR
Allows you to monitor the filtered signal.
Dynamics Plug-ins
30 | VST Rack Pro Plug-in Reference