User Manual

VintageCompressor
VintageCompressor is modeled after vintage type compressors.
This compressor features separate controls for [Input] and [Output] gain, [Attack], and [Release].
In addition, there is a [Punch] mode which preserves the attack phase of the signal and a program-
dependent [Auto Release] function.
VU Meter
Shows the amount of gain reduction.
[IN/OUT] Meters
Shows the highest peaks of all available input and output channels.
INPUT
Determines the compression amount. The higher the input gain, the more compression is applied.
ATTACK (0.1 to 100 ms)
Determines how fast the compressor responds. If the attack time is long, more of the early part
of the signal passes through unprocessed.
[PUNCH] Button
If this is activated, the early attack phase of the signal is preserved, retaining the original
punch in the audio material, even with short Attack settings.
RELEASE (10 to 1000 ms or [AUTO] mode)
Sets the time after which the gain returns to its original level. If the [Auto] button is activated,
the plug-in automatically finds the best release setting for the audio material.
MIX
Adjusts the mix between dry signal and wet signal, preserving the transients of the input signal.
OUTPUT (-48 to 24 dB)
Sets the output gain.
Dynamics Plug-ins
VST Rack Pro Plug-in Reference | 31