User Manual

EQ Plug-ins
GEQ-30
These are graphic equalizers. GEQ-30 has 30 available frequency bands.
Each band can be attenuated or boosted by up to 12 dB, allowing for fine control of the frequency
response. In addition, there are several preset modes available that can add color to the sound of GEQ-
30.
You can draw response curves in the main display by clicking and dragging with the mouse. You have to
click one of the sliders before you drag across the display.
At the bottom of the window, the individual frequency bands are shown in Hz. At the top of the
display, the amount of attenuation/boost is shown in dB.
RANGE
Allows you to adjust how much a set curve cuts or boosts the signal.
OUTPUT
Sets the overall gain of the equalizer.
INVERT
Inverts the current response curve.
FLATTEN
Resets all the frequency bands to 0 dB.
EQ Modes
The Mode pop-up menu in the upper right corner allows you to select an EQ mode, which add color or
character to the equalized output in various ways.
True Response
Applies serial filters with an accurate frequency response.
Digital Standard
In this mode, the resonance of the last band depends on the sample rate.
Classic
Applies a classic parallel filter structure where the response does not follow the set gain values
EQ Plug-ins
32 | VST Rack Pro Plug-in Reference