User Manual

StudioChorus
StudioChorus is a two-stage chorus effect that adds short delays to the signal and modulates the
pitch of the delayed signals to produce a doubling effect. The two separate stages of chorus
modulation are independent and are processed serially (cascaded).
DELAY
Affects the frequency range of the modulation sweep by adjusting the initial delay time.
WIDTH
Sets the depth of the chorus effect. Higher settings produce a more pronounced effect.
SPATIAL
Sets the stereo width of the effect. Turn clockwise for a wider stereo effect.
MIX
Sets the level balance between the dry signal and the wet signal. If the effect is used as a send
effect, set this parameter to the maximum value, as you can control the dry/effect balance with
the send level.
RATE
If [Tempo Sync] is activated, [Rate] allows you to specify the base note value for synchronizing
the modulation sweep to the tempo of the host application (1/1 to 1/32, straight, triplet, or
dotted).
If [Tempo Sync] is deactivated, the sweep rate can be set freely with the [Rate] dial.
SYNC
Activates/Deactivates tempo sync.
Waveform Shape
Allows you to select the modulation waveform, altering the character of the chorus sweep. A
sine and a triangle waveform are available.
Modulation Plug-ins
40 | VST Rack Pro Plug-in Reference