User Manual

EQ Settings
In the Equalizer section, you can tune the sound of the reverb.
EQ Curve
Shows the EQ curve. You can use the EQ parameters below the display to change the EQ curve,
or modify the curve manually by dragging the curve points.
Activate EQ
This button to the right of the EQ parameters activates the EQ for the effect plug-in.
Low Shelf On
Activates the low shelf filter that boosts or attenuates frequencies below the cutoff frequency
by the specified amount.
LOW FREQ (20 to 500)
Sets the frequency of the low band.
LOW GAIN (-24 to +24)
Sets the amount of attenuation/boost for the low band.
Mid Peak On
Activates the mid peak filter that creates a peak or notch in the frequency response.
MID FREQ (100 to 10000)
Sets the center frequency of the mid band.
MID GAIN (-12 to +12)
Sets the amount of attenuation/boost for the mid band.
Hi Shelf On
Activates the high shelf filter that boosts or attenuates frequencies above the cutoff
frequency by the specified amount.
Reverb Plug-ins
50 | VST Rack Pro Plug-in Reference