User Manual

Delay Plug-ins
MonoDelay
This is a mono delay effect. The delay line uses either tempo-based or freely specified delay time
settings.
LO FILTER
Affects the feedback loop of the effect signal and allows you to roll off low frequencies. The
button below the knob activates/deactivates the filter.
HI FILTER
Affects the feedback loop of the effect signal and allows you to roll off high frequencies. The
button below the knob activates/deactivates the filter.
DELAY
Sets the delay time in milliseconds.
SYNC
Activates/Deactivates tempo sync.
FEEDBACK
Sets the amount of the signal that is sent back into the delay input. The higher this value, the
higher the number of repeats.
MIX
Sets the level balance between the dry signal and the wet signal. If the effect is used as a send
effect, set this parameter to the maximum value, as you can control the dry/effect balance with
the send level.
Delay Plug-ins
4 | VST Rack Pro Plug-in Reference