User Manual

[VCM] Compressor 276
Compressor 276 emulates the characteristics of an analog compressor that is a staple in recording
studios. You can obtain thick, strong sounds that are suitable for drums and bass parts.
This plug-in operates in mono or stereo mode, depending on the channel configuration of the rack.
[INPUT] Knob
Adjusts the input level.
[RATIO] Knob
Adjust the ratio of the compressor.
[ATTACK] Knob
Adjusts the attack time of the compressor.
[OUTPUT] Knob
Adjusts the output gain.
[AUTO MAKEUP] Switch
When activated, it automatically compensates for the drop in output gain when the compressor
is applied.
[INTERNAL SC HPF] Switch
When activated, less compression is applied to the low frequencies so that the low frequencies
are emphasized.
[RELEASE] Knob
Adjusts the release time of the compressor.
[VU] Meter
Displays the signal that is selected with the [GR]/[-10]/[-20]/[OFF] switch.
[GR]/[-10]/[-20]/[OFF] Switch
Selects the signal that is monitored by the VU meter.
GR: Displays the amount of gain reduction.
-10: Displays the signal with 0VU as -10 dBu.
-20: Displays the signal with 0VU as -20 dBu.
OFF: Deactivates the VU meter.
Dynamics Plug-ins
VST Rack Pro Plug-in Reference | 69