User Manual

HPF
This is a filter that cuts the low-frequency components of reverberation. Components that are
below the frequency specified by this value are cut. This filter has no effect on the original
sound.
LPF
This is a filter that cuts the high-frequency components of reverberation. Components that are
above the frequency specified by this value are cut. This filter has no effect on the original
sound.
Hi Ratio
This is the length of the high-frequency reverberation. The high-frequency reverberation time is
specified as a ratio with [Reverb Time].
Low Ratio
This is the length of the low-frequency reverberation. The low-frequency reverberation time is
specified as a ratio with [Reverb Time].
Low Freq
This is the reference frequency for [Low Ratio]. Frequency bands below this value are affected
by [Low Ratio].
Filter Frequency Response Curve
The curve changes depending on the HPF and LPF values.
Reverberation Image
This is an image of the reverberation of the high band (10 kHz), mid band (1 kHz), and low band
(100 Hz). The image changes depending on the value of each parameter. The vertical axis
represents the level, the horizontal axis represents the reverberation time, and the shape
represents the envelope.
Reverberation Time Curve
This curve displays the reverberation time of the high band (10 kHz), mid band (1 kHz), and low
band (100 Hz).
The curve changes depending on the values for [Reverb Time], [Hi Ratio], and [Low Ratio].
Zoom
Displays the length of time allocated to the time axis (horizontal axis of the graph) in seconds.
Zoom Out Button
Click this button to increase the number of seconds allocated to the time axis (horizontal axis
of the graph). As a result, the width of the graph is reduced.
Zoom In Button
Click this button to decrease the number of seconds allocated to the time axis (horizontal axis
of the graph). As a result, the width of the graph is increased.
MIX Slider
Adjusts the balance between the original sound and the effect. If this value is 0%, only the
original sound is output. If it is 100%, only the effect is output.
Reverb Plug-ins
78 | VST Rack Pro Plug-in Reference