User Manual

RUio16-D Owner’s Manual
12
Rear Panel
1 [OUTPUT +4dBu] jacks
These are XLR-type analog output
jacks. Connect an analog mixer,
monitor speakers or related equipment
here. You can adjust the output level
with the [OUTPUT] knob on the front
panel of this unit.
2 [USB 2.0 (PC)] port
Connect your computer to this port.
NOTICE
When connecting your computer to the
[USB 2.0 (PC)] port, observe the following
to prevent the computer or this unit from
freezing or shutting down, which could lead
to data loss.
• Observe the following before connecting/
disconnecting the USB cables.
- Quit all open software applications.
- Check whether data is still being
transmitted from this unit.
• Wait at least six seconds between
connecting/disconnecting the USB
cables.
• Make sure to use the USB cables included
with this unit.
3 [POWER SOURCE] switch
This switch selects the jack used to
supply power on this unit. Switch this
to “USB 2.0 (PC)” to supply power
from the [USB 2.0 (PC)] jack, or switch
this to “5V DC IN” to supply power
from the [5V DC IN] jack.
4 [5V DC IN] jack
For connecting a USB power adapter
or USB mobile battery. Connect a USB
type-C cable to this jack.
Use a power supply when connecting
this unit to a computer that does not
supply sufficient bus power. (This unit
does not include a USB power adapter
or USB mobile battery.)
NOTICE
• Read the safety precautions for the USB
power adapter that you are using.
• Use a USB power adapter that can supply
power via USB cable.
Output voltage: 4.8–5.2 V
Output current: 1.5 A or greater
2 4 63 751
HotGround
Cold