User Manual
Table Of Contents
- PRECAUTIONS
- Contents
- Introduction
- Main Features
- Panel Controls and Functions
- Before Using This Product
- Basic Operations
- How to Connect via Dante
- Attaching the Cable Hook
- Attaching the Rubber Feet
- Installing in a Rack
- Restoring the Factory Default Settings (Initialization)
- Messages
- General Specifications
- Dimensions
RUio16-D Owner’s Manual
16
Example 2: Sending audio (such as a mic signal) to a Dante-
enabled device
• This sends the audio from devices connected to INPUT 15/16 to DANTE 15/16.
Example 3: Listening to audio from your computer or Dante via
monitor speakers
• This outputs the analog signal from the computer’s MONITOR L/R.
Set the [MONITOR/DANTE/USB] switch to “MONITOR.”
• This outputs the analog signal that is input from DANTE 15/16.
Set the [MONITOR/DANTE/USB] switch to “DANTE.”
NOTE
• When connecting to the INPUT 15/16 jacks, the analog signal is sent to the Dante output and to the
computer via USB.
• You can also use the PHONES output.
• To listen to the sound from your computer without using VST Rack, select “RUio16-D MONITOR L/
R” as the playback audio device, and set the OUTPUT switch to “MONITOR.”
• When bringing in the sound from INPUT 15/16 using software other than VST Rack, select
“RUio16-D 15–16” as the recording audio device. Note that you may not be able to select this
device depending on the OS and software.
USBDante
VST Rack
RUio16-D
Volume adjustment
Ch 1-16
Ch 1-16
Ch 1-16
Ch 1-16
MONITOR
LR
Ch 15/16
OUTPUT SWITCH
Digital mixer Computer Monitor speakers or analog mixer
Mic or analog mixer