User Manual

CL Editor Owner’s Manual

5 BALANCE

Adjusts the left/right balance of the STEREO channel.

For MONO channels, this control indicates the send level to the MATRIX bus.

6 SEL (Channel selection)

Selects the channel for which you want to make settings. (You can specify L and R indepen-

dently.)

7 CUE

This button cue-monitors the signal of the STEREO/MONO channel.

In the ONLINE state, if MATRIX bus channels 7 and 8 can be used as a second cue, the

indication shows “CUE A,” “CUE B,” or “CUE AB” depending on the settings of the

console.

If the Channel Select/Sends On Fader checkbox in the System Setup dia-

log box is not checked, the [CUE] button will be hidden in the screen.

8 ON

This switches the STEREO/MONO channel on/off.

The button is color-coded and indicates status as follows:

White: STEREO/MONO channel is on (normal mode.)

Black: STEREO/MONO channel/Send is off.

Other colors: Send is on (SENDS ON FADER mode.)

9 Fader

Adjusts the output level of the STEREO/MONO channel.

The current fader value is shown in the numeric box immediately below the fader.

The numbers and alphabetical letters at the right of the fader indicate the DCA group and

mute groups to which that channel belongs, and show the Recall Safe and Mute Safe status

of the channel. (For the significance of the numbers and alphabetical letters, see ➥ p.24.)

• Click the indicator area at the right side of the fader to switch between 3

indicators (mute group indicator, DCA group indicator, level meter).

• While holding down the <Ctrl> (< >) key of your computer keyboard, drag

& drop the area around the fader to copy the channel (CH COPY).

The fader is color-coded and indicates status as follows:

Red or Yellow: You can adjust the input level of the STEREO/MONO channel (normal

mode.)

Gray: STEREO/MONO channel is off.

Other colors: You can adjust the send level (SENDS ON FADER mode.)

0 Channel number

This is the channel number (ST or M.) You can double-click this number to open the

Selected Channel window for this channel. If you hold down the <Ctrl>(< >) key of your

computer keyboard and double-click this, the Selected Channel window will open as an

additional view.

A Channel name

This is a text box that displays the channel name. You can also edit the channel name in this

text box. You can right-click (<control> key + click) the text box to select a channel color.

NOTE