User Manual

20
*Notes
1) Channel Name is reproduced with the first six characters.
2) Direct Out point is reproduced, though the value will be substituted if the destination console
doesn’t have the same point.
Direct Out Point -Input Channel
M7CL
Pre HPF
Pre EQ
Pre Fader
Post On
LS9
Pre HPF
Pre EQ
Pre Fader
<Key to table> Blue field and arrow means compatible setting
Orange field and arrow means setting replaced by substitute setting
3) Effects are reproduced unless the Effect type is unavailable in LS9.
If the M7CL Scene contains effect type;
- Comp 276, Comp 276s
- Comp 260, Comp 260s
- Equalizer 601
- Open Deck
the effect module will be set to Rev-X Hall and bypass will be enabled in LS9.
4) Recall Safe & Focus
Refer to section 3.8, “Recall Filter” Treatment.