User Manual
Table Of Contents
- How to Use This Reference Manual
- Contents
- Function Tree
- SELECTED CHANNEL section
- Centralogic section
- Input and output patching
- Input channels
- Signal flow for input channels
- Specifying the channel name, icon and channel color
- Making HA (Head Amp) settings
- Sending a signal from an input channel to the STEREO/MONO buses
- Sending a signal from an input channel to a MIX/ MATRIX bus
- Correcting delay between channels (Input Delay)
- Channel library operations
- Output channels
- EQ and Dynamics
- Grouping and linking
- Scene memory
- About scene memories
- Using scene memories
- Editing scene memories
- Using the Global Paste function
- Using the Focus function
- Using the Recall Safe function
- Using the Fade function
- Outputting a control signal to an external device in tandem with scene recall (GPI OUT)
- Playing back an audio file that links to a scene recall
- Using Preview mode
- Monitor and Cue functions
- Talkback and Oscillator
- Meters
- Graphic EQ, effects, and Premium Rack
- I/O device and external head amp
- MIDI
- User settings (Security)
- Recorder
- Help function
- Other functions
- About the SETUP screen
- Word clock and slot settings
- Using cascade connections
- Basic settings for MIX buses and MATRIX buses
- Switching the entire phantom power supply on/ off
- Specifying the brightness of the touch screen, LEDs, channel name displays, and lamps
- Setting the date and time of the internal clock
- Setting the network address
- Initializing the unit to factory default settings
- Adjusting the detection point of the touch screen (Calibration function)
- Adjusting the faders (Calibration function)
- Fine-tuning the input and output gain (Calibration function)
- Adjusting the channel color (Calibration function)
- Adjusting the brightness of the channel name display
- Adjusting the contrast of the channel name display
- Dante audio network settings
- Using GPI (General Purpose Interface)
- Appendices
- EQ Library List
- DYNAMICS Library List
- Dynamics Parameters
- Effect Type List
- Effects Parameters
- Premium Rack Processor Parameters
- Effects and tempo synchronization
- Parameters that can be assigned to control changes
- NRPN parameter assignments
- Mixing parameter operation applicability
- Functions that can be assigned to USER DEFINED keys
- Functions that can be assigned to USER DEFINED knobs
- Functions that can be assigned to the assignable encoders
- MIDI Data Format
- Warning/Error Messages
- Electrical characteristics
- Mixer Basic Parameters
- M IDI Implementation Chart
- Index
Other functions
Reference Manual
221
2. Press a HA device select button to access the REMOTE HA SELECT popup window.
This screen contains the following items.
1 DEVICE LIST
Shows a list of the HA devices on the Dante audio network.
2 with RECALL button
If this button is on, the settings saved in the CL series console will be applied to the HA device
when the CL series console starts up and when a scene is recalled.
3 DEVICE LIST select knob
Use the multi-function knob to select the HA device that you want to mount.
NOTE
• Do not specify “with RECALL” if an HA device is shared by multiple CL series consoles and
settings have already been made on a different CL series console.
• The HA device can also be operated from a CL series console that is not set to “with RECALL.”
3. After you’ve selected the HA device to mount, press the OK button to close the
REMOTE HA SELECT popup window.
If you’ve changed the setting by pressing the “with RECALL” button, a confirmation dialog box
will appear.
To make the setting, press the OK button.
Using GPI (General Purpose Interface)
The rear panel GPI (General Purpose Interface) connector can be used as an input/output connector.
This connector provides five GPI IN ports and five GPI OUT ports. For example you can use an
external switch to control internal parameters of the CL series console or to switch scenes. Conversely,
operations or scene changes performed on the CL series console can send control signals to an external
device.
For details on how to send control signals to an external device when you switch scenes, refer to
“Outputting a control signal to an external device in tandem with scene recall (GPI OUT)” on page 93.
Using GPI IN
You can use the GPI IN ports of the GPI connector to control the parameters of the CL series console
from an external device. For example, you could use an external switch to turn the CL series console’s
Talkback on/off, operate the Tap Tempo function, or switch scenes.
1. Connect an external device to the CL series console’s GPI connector.
2. In the function access area, press the SETUP button to access the SETUP screen.
1
3
2