User Manual
Table Of Contents
- Contents
- What you can do using ProVisionaire Touch
- Operating requirements of the software
- Terms and concepts to understand
- Installation procedure
- Startup
- Basic process
- Operations for common settings
- About the menu bar
- Settings file management — the File Management button
- Selecting multiple widgets — Multi Select button
- Creating a custom panel — the Page Edit button
- Widget design
- Assigning parameters
- Switching pages — the Page Selection button (Control mode)
- Managing pages — the Page Management button (Design mode)
- Registering devices to control — the Device Management button
- Control panel settings — the Setup button
- Control panel information — the Information button
- Preparations before you make connections
- Troubleshooting
- About the software license
72
Preparations before you make connections
Specify the Wi-Fi access point as described in the owner’s manual of
each device.
Although there is no need to make special settings, we recommend
that you use security such as WPA in order to prevent unauthorized
access to the network from outside.
Guidelines for settings are provided below.
1. Specify the name of the Wi-Fi network.
2. Specify the security mode (e.g., WPA2) and password.
3. Select the wireless mode. (such as 802.11n or 802.11g)
4. If possible, enable “Auto Channel Selection.”
The wireless channel with the least interference will be selected.
For the fastest communication between the iPad and the Wi-Fi
access point, we recommend that you select an 802.11n network. If
you use multiple external antennas, it will be easier to connect to the
Wi-Fi access point.
In addition, we recommend that you make stealth mode and MAC
address filter settings to increase security.
Use CAT5e cables to connect the target system with the Wi-Fi
access point.
Include an Ethernet switch in the system if necessary.
To convey audio signals, connect the ST IN of the MTX or MRX to
the AUX OUT or ANALOG OUT of the MusicCast device or to the
OMNI OUT of the Disklavier.
Wi-Fi access point settings Connecting to the target system
iPad with ProVisionaire Touch or
ProVisionaire Touch KIOSK installed
Target system
CAT5e cable
Wi-Fi access
point
Ethernet
switch
Computer